Wrap Text
Alphamin announces a 46% increase in the Mpama South inferred mineral resource estimate
Alphamin Resources Corp.
Continued in the Republic of Mauritius
Date of incorporation: 12 August 1981
Corporation number: C125884 C1/GBL
TSX-V share code: AFM
JSE share code: APH
ISIN: MU0456S00006
ALPHAMIN ANNOUNCES A 46% INCREASE IN THE MPAMA SOUTH INFERRED MINERAL
RESOURCE ESTIMATE
3 June 2022 – Alphamin Resources Corp. (AFM:TSXV, APH:JSE AltX, “Alphamin” or the
“Company”), a producer of 4% of the world’s mined tin1 from its high-grade operation in the
Democratic Republic of Congo, is pleased to announce an updated Mpama South Mineral
Resource estimate.
HIGHLIGHTS
- Mpama South updated Inferred Resource up 46% to 4.99Mt based on assays from 22
additional extensional drillholes. Mpama South Mineral Resource now stands at:
• 0.84Mt @ 2.53% Sn for 21.4kt contained tin in the Indicated category; and
• 4.99Mt @ 2.50% Sn for 124.7kt contained tin in the Inferred category
- Significant additional resource growth potential at Mpama South
- Mpama South in-fill drilling on track for completion by July 2022, extension drilling
recommences in June 2022
- Mpama South early development works in progress – project completion expected to
increase Alphamin’s annual contained tin production from the current 12,000tpa to
~20,000tpa, approximating 6.6% of the world’s mined tin1
Mpama South Updated Mineral Resource Estimate
The updated Mineral Resource for Mpama South follows two months after the previous update
announced on 29 March 2022 and three months after the Maiden Mineral Resource announced
7th March 2022. The update is based on further receipt of assays for another 22 extensional
drillholes completed subsequent to the previous estimate which was based on 102 drillholes. The
updated Mineral Resource is presented in Figure 1.
Following the receipt of assays for the additional 22 drillholes, an updated Mineral Resource
Estimate (MRE) for the Mpama South project was completed. The MRE now includes results from
1 Based on data obtained from International Tin Association Tin Industry Review Update 2021
124 drillholes as well as 6 drillholes in the Wedge area from the earlier drilling to 2015. The MRE
was estimated using the Canadian Institute of Mining, Metallurgy and Petroleum (CIM) Best
Practice Guidelines (2019) and is reported in accordance with the 2014 CIM Definition Standards.
The Mineral Resource is classified into the Indicated and Inferred categories and is reported at a
base case tin grade of 1.0%, which satisfies reasonable prospects for economic extraction.
Mpama South Inferred Resources increased by 46% to 4.99Mt. The Mineral Resource Statement
with an effective date of 31 May 2022 is presented in Table 1:-
Table 1: Updated Mpama South Mineral Resources effective date 31 May 2022
Classification Tonnes (millions) Sn % Sn Tonnes
(thousands)
Indicated2 0.84 2.53 21.4
Inferred3 4.99 2.50 124.7
2 CIM Definition: An Indicated Mineral Resource is that part of a Mineral Resource for which quantity, grade or quality, densities, shape and
physical characteristics are estimated with sufficient confidence to allow the application of Modifying Factors insufficient detail to support mine
planning and evaluation of the economic viability of the deposit.
3 CIM Definition: An Inferred Mineral Resource is that part of a Mineral Resource for which quantity and grade or quality are estimated on the
basis of limited geological evidence and sampling. Geological evidence is sufficient to imply but not verify geological and grade or quality
continuity.
Mineral Resources that are not Mineral Reserves do not have a demonstrated economic viability
and require advanced studies and economic analysis to prove their viability for extraction.
The MRE for Mpama South does not include a substantial quantity of subsequent drilling
containing characteristic high grade visual cassiterite. Around 27 additional drillholes have been
drilled within and beyond the limits of the updated MRE presented in Figure 1. The majority of
these are part of an in-fill drilling campaign targeting conversion of Inferred Resources to Indicated
Resource confidence. The infill campaign commenced in March 2022 and will be completed by
July 2022. An updated MRE is expected to be announced in Q3 2022.
Extensional drilling down dip and in the shallower northern portion of Mpama South will re-
commence in June 2022 to carry on extending known mineralisation which is still open in multiple
directions. The Company targets releasing expanded Mpama South MRE updates throughout the
remainder of the drilling phases in 2022 as assays are received.
The MRE has been completed by Mr. J.C. Witley (BSc Hons, MSc (Eng.)) who is a geologist with
33 years’ experience in base and precious metals exploration and mining as well as Mineral
Resource evaluation and reporting. He is a Principal Resource Consultant for The MSA Group
(an independent consulting company), is registered with the South African Council for Natural
Scientific Professions (SACNASP) and is a Fellow of the Geological Society of South Africa
(GSSA). Mr. Witley has the appropriate relevant qualifications and experience to be considered
a “Qualified Person” for the style and type of mineralisation and activity being undertaken as
defined in National Instrument 43-101 Standards of Disclosure of Mineral Projects.
Early-Works Progress on the Development of Mpama South
Early works completed to date since the Company’s announcement of the development decision
on 29th March 2022 are as follows:
• EPCM contract awarded to Obsideo (who successfully executed the fine tin plant in 2021)
• Long lead time plant capital orders have been placed as well as steel structure orders
• Mpama South access road completed and site clearing commenced
• Bidding completed and under evaluation for bulk earthworks and civil contracts
Qualified Persons
Mr Jeremy Witley, Pr. Sci. Nat., B.Sc. (Hons.) Mining Geology, M.Sc. (Eng.), is a qualified person
(QP) as defined in National Instrument 43-101 and has reviewed and approved the scientific and
technical information contained in this news release. He is a Principal Mineral Resource
Consultant of The MSA Group (Pty.) Ltd., an independent technical consultant to the Company.
JSE Sponsor
Nedbank Corporate and Investment Banking, a division of Nedbank Limited
____________________________________________________________________________
FOR MORE INFORMATION, PLEASE CONTACT:
Maritz Smith
CEO
Alphamin Resources Corp.
Tel: +230 269 4166
E-mail: msmith@alphaminresources.com
____________________________________________________________________________
CAUTION REGARDING FORWARD LOOKING STATEMENTS
Information in this news release that is not a statement of historical fact constitutes forward-
looking information. Forward-looking statements contained herein include, without limitation,
statements relating to the anticipated future exploration and resource estimation activities and
outcomes and the timing thereof and expected increases in tin production from the development
of the Mpama South deposit. Forward-looking statements are based on assumptions
management believes to be reasonable at the time such statements are made. There can be no
assurance that such statements will prove to be accurate, as actual results and future events
could differ materially from those anticipated in such statements. Accordingly, readers should not
place undue reliance on forward-looking statements. Although Alphamin has attempted to identify
important factors that could cause actual results to differ materially from those contained in
forward-looking statements, there may be other factors that cause results not to be as anticipated,
estimated or intended. Factors that may cause actual results to differ materially from expected
results described in forward-looking statements include, but are not limited to: uncertainty of future
exploration and assay results and consistency with past results and expectations; uncertainties
related to the technical and economic parameters applied in the Mpama South Preliminary
Economic Assessment regarding forecasted tin prices, the tin grade mined and processing
recoveries as well as operating costs; uncertainties inherent in estimates of Mineral Resources,
global geopolitical and economic uncertainties, volatility of metal prices, uncertainties with respect
to social, community and environmental impacts, uninterrupted access to required infrastructure,
adverse political events, impacts of the global Covid-19 pandemic as well as those risk factors
set out in the Company’s Management Discussion and Analysis and other disclosure documents
available under the Company’s profile at www.sedar.com. Forward-looking statements contained
herein are made as of the date of this news release and Alphamin disclaims any obligation to
update any forward-looking statements, whether as a result of new information, future events or
results or otherwise, except as required by applicable securities laws.
Neither the TSX Venture Exchange nor its regulation services provider (as that term is defined in
the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of
this news release.
Appendix 1: SAMPLE PREPARATION, ANALYSES AND QUALITY CONTROL AND QUALITY
ASSURANCE (QAQC)
For sample preparation, analyses and quality control and quality assurance, see the Company’s
news release dated 07 March 2022 entitled “ALPHAMIN ANNOUNCES MAIDEN MINERAL
RESOURCE ESTIMATE AND POSITIVE PRELIMINARY ECONOMIC ASSESSMENT FOR
MPAMA SOUTH”
Appendix 2: SIGNIFICANT INTERCEPTS (0.5% Sn lower threshold)
Mpama South Drillholes prefixed “BGH”
Mpama North Drillholes prefixed “MND”
Easting Northing Width Sample Position
Hole RLm Azi (°) Dip (°) From To Sn %
GPS GPS (m)1 mid_x mid_y mid_z
BGH017 582535 9884822 732 55 -10 237.8 238.8 4.99 1.00 582,732 9,884,966 678.6
141.2 144.4 2.07 3.15 582,691 9,884,820 727.9
BGH018 582535 9884822 732 93 0
145.8 151.0 0.76 5.25 582,696 9,884,820 727.9
BGH019 582535 9884822 732 85 -5 147.0 152.0 2.05 5.00 582,696 9,884,837 715.8
160.6 164.4 1.45 3.80 582,704 9,884,846 689.3
BGH020 582535 9884822 732 84 -15
169.3 171.1 5.42 1.80 582,711 9,884,846 687.7
109.2 110.3 3.20 1.10 582,654 9,884,821 700.1
BGH021 582535 9884822 732 93 -15
164.6 167.3 3.29 2.72 582,708 9,884,818 687.6
75.0 80.5 3.99 5.53 582,633 9,884,784 729.3
BGH022 582554 9884785 732 90 0 109.0 110.0 1.35 1.00 582,664 9,884,785 729.9
119.2 122.1 2.22 2.88 582,676 9,884,785 730.1
171.4 174.3 1.72 2.89 582,710 9,884,859 683.7
BGH023 582535 9884822 732 75 -15
175.9 178.0 1.09 2.15 582,714 9,884,860 683.0
127.7 129.6 0.54 1.90 582,679 9,884,749 717.2
BGH024 582554 9884785 732 103 -5
138.0 142.0 1.13 4.05 582,690 9,884,746 716.2
212.3 213.4 0.60 1.15 582,724 9,884,919 662.3
218.0 221.5 2.29 3.45 582,731 9,884,921 660.7
BGH025 582535 9884822 732 55 -20
222.7 223.7 13.05 1.00 582,734 9,884,923 659.9
228.0 234.8 2.73 6.80 582,741 9,884,926 658.0
103.7 108.0 3.30 4.29 582,649 9,884,735 713.7
BGH026 582554 9884785 732 113 -10 134.8 136.5 3.72 1.65 582,676 9,884,722 708.6
161.0 162.5 5.61 1.50 582,699 9,884,711 704.5
110.0 111.4 7.24 1.40 582,655 9,884,753 692.2
141.9 152.5 4.85 10.60 582,686 9,884,745 680.0
BGH030 582554 9884785 732 115 -20
158.0 161.2 3.61 3.20 582,699 9,884,742 675.3
174.5 175.8 11.03 1.35 582,713 9,884,738 670.5
177.0 178.7 1.70 1.72 582,692 9,884,684 671.3
182.0 188.3 3.00 6.25 582,697 9,884,679 669.1
BGH032 582554 9884785 732 125 -20 190.3 193.0 0.95 2.75 582,702 9,884,676 667.2
194.4 202.0 1.37 7.60 582,707 9,884,672 665.3
203.5 208.0 2.67 4.50 582,713 9,884,668 663.2
174.8 178.0 11.99 3.20 582,689 9,884,696 653.3
195.7 200.0 1.21 4.30 582,706 9,884,686 644.8
202.4 206.7 1.86 4.28 582,711 9,884,683 642.3
BGH034 582554 9884785 732 115 -25
208.0 213.3 1.40 5.30 582,716 9,884,680 640.1
216.3 221.3 1.42 5.05 582,722 9,884,676 637.3
225.7 231.0 0.70 5.35 582,730 9,884,671 634.0
212.4 214.0 0.58 1.65 582,729 9,884,879 634.0
BGH027 582544 9884822 732 68 -27 226.0 229.3 1.32 3.30 582,741 9,884,883 628.4
235.5 236.6 1.54 1.13 582,749 9,884,885 625.2
125.0 126.0 1.72 1.00 582,676 9,884,772 700.9
136.1 137.2 1.85 1.08 582,687 9,884,770 698.4
BGH028 582554 9884785 732 90 -10
140.3 142.0 1.03 1.72 582,691 9,884,770 697.4
147.5 151.3 2.88 3.79 582,699 9,884,769 695.5
126.0 128.4 4.66 2.35 582,663 9,884,826 678.5
BGH029 582544 9884822 732 93 -25 178.9 184.1 1.25 5.15 582,713 9,884,827 657.7
193.7 196.1 3.95 2.35 582,726 9,884,827 653.0
208.0 211.5 0.99 3.53 582,729 9,884,876 639.9
BGH031 582544 9884822 732 75 -25
219.4 222.4 1.16 2.98 582,739 9,884,879 636.0
259.0 265.5 7.32 6.46 582,756 9,884,929 612.8
BGH033 582544 9884822 732 60 -27
268.5 270.5 1.02 1.99 582,762 9,884,931 610.0
152.0 165.0 2.96 13.00 582,686 9,884,816 665.0
BGH035 582554 9884785 732 90 -25 171.0 173.6 1.47 2.60 582,703 9,884,815 657.4
176.6 180.1 2.40 3.48 582,709 9,884,814 654.9
147.5 151.4 2.31 3.90 582,687 9,884,878 724.8
BGH036 582544 9884822 732 65 0 156.6 160.7 0.93 4.02 582,696 9,884,881 724.7
154.0 157.0 3.81 3.00 582,680 9,884,741 647.5
194.6 197.6 1.54 2.95 582,712 9,884,730 626.0
BGH037 582554 9884785 732 105 -30 208.0 211.2 1.29 3.23 582,723 9,884,726 619.3
216.3 220.2 2.79 3.90 582,730 9,884,723 615.1
222.4 226.7 1.77 4.30 582,735 9,884,721 612.1
151.7 154.6 5.22 2.90 582,677 9,884,851 654.3
BGH038 582544 9884822 732 75 -30 218.3 223.7 3.38 5.35 582,735 9,884,861 621.4
226.7 231.5 1.95 4.80 582,743 9,884,862 617.6
112.1 113.0 2.12 0.92 582,665 9,884,755 687.6
116.3 121.0 3.33 4.65 582,661 9,884,753 686.1
BGH039 582554 9884785 732 100 -22
145.0 166.0 2.20 21.00 582,696 9,884,744 674.2
174.5 176.0 0.95 1.50 582,713 9,884,739 668.9
232.0 233.0 0.95 1.00 582,725 9,884,922 618.2
BGH040 582544 9884822 732 60 -30
273.7 277.1 3.79 3.35 582,761 9,884,937 600.0
BGH041 582500 9884847 732 55 -25 340.0 344.5 3.03 4.50 582,807 9,885,002 599.5
277.4 280.0 1.93 2.65 582,751 9,884,922 569.4
BGH042 582544 9884822 732 60 -35 308.5 312.0 0.62 3.50 582,776 9,884,932 552.6
313.0 315.6 1.52 2.55 582,779 9,884,933 550.5
102.5 104.2 2.69 1.65 582,644 9,884,808 709.0
BGH043 582544 9884822 732 100 -10 123.0 124.0 1.06 1.00 582,663 9,884,805 704.8
163.6 167.0 2.82 3.36 582,704 9,884,798 696.7
BGH044 582500 9884847 710 70 -35 330.0 334.1 1.31 4.13 582,764 9,884,941 533.4
120.7 121.8 31.55 1.10 582,656 9,884,806 687.4
BGH045 582544 9884822 732 100 -20 156.0 159.4 0.56 3.40 582,689 9,884,799 674.7
176.7 183.6 3.24 6.92 582,708 9,884,795 668.1
195.2 206.0 2.85 10.82 582,712 9,884,795 630.5
212.5 215.2 1.90 2.65 582,723 9,884,793 623.7
BGH046 582544 9884822 732 100 -30
218.0 220.6 7.16 2.60 582,728 9,884,792 620.8
225.0 226.0 4.36 1.00 582,733 9,884,791 617.7
121.6 124.6 0.91 2.99 582,653 9,884,879 739.2
BGH047 582565 9884535 718 60 0
147.1 148.1 1.28 1.00 582,675 9,884,889 741.1
140.8 143.1 0.90 2.30 582,708 9,884,496 727.7
BGH048 582567 9884509 727 90 0
146.5 148.0 0.74 1.47 582,713 9,884,495 728.0
BGH049 582565 9884535 718 65 -15 145.4 147.4 4.27 2.00 582,689 9,884,599 674.5
BGH050 582567 9884509 727 105 -5 160.0 161.4 1.06 1.38 582,722 9,884,469 711.7
134.8 137.0 2.23 2.20 582,662 9,884,630 712.3
151.0 156.3 1.20 5.30 582,675 9,884,642 711.4
BGH051 582565 9884535 718 40 0
164.2 169.5 3.95 5.27 582,685 9,884,651 710.8
171.3 172.6 4.08 1.30 582,688 9,884,655 710.6
BGH052 582567 9884509 727 120 0 205.9 207.1 1.86 1.20 582,732 9,884,385 722.9
173.7 176.9 9.58 3.20 582,685 9,884,653 669.2
178.6 181.4 4.07 2.88 582,688 9,884,656 667.9
192.4 196.9 3.28 4.45 582,698 9,884,666 664.0
BGH053 582565 9884535 718 40 -15
198.9 206.8 2.45 7.91 582,704 9,884,671 661.8
207.5 209.5 5.04 1.97 582,708 9,884,675 660.3
214.7 216.0 2.32 1.35 582,713 9,884,680 658.6
BGH054 No significant intercepts
BGH055 582565 9884535 718 80 -15 145.0 146.0 0.62 1.00 582,705 9,884,549 682.7
BGH056 No significant intercepts
BGH057 No significant intercepts
BGH058 582565 9884510 727 95 -5 153.4 155.6 1.98 2.25 582,717 9,884,501 703.9
BGH059 582567 9884536 718 95 0 165.0 166.0 3.63 1.00 582,732 9,884,528 714.4
BGH060 No significant intercepts
BGH061 582567 9884536 727 130 -10 157.6 159.2 1.22 1.62 582,719 9,884,525 677.7
BGH062 582567 9884537 718 95 -15 154.0 156.0 2.18 2.00 582,695 9,884,589 650.2
186.3 194.4 0.82 8.12 582,719 9,884,661 650.5
197.4 202.5 1.12 5.03 582,715 9,884,661 641.8
205.0 209.1 0.83 4.05 582,712 9,884,661 635.4
BGH063 582782 9884646 829 270 -70
211.1 218.9 2.06 7.77 582,709 9,884,661 628.3
220.4 222.6 0.86 2.15 582,706 9,884,661 622.5
231.0 233.0 0.87 2.00 582,701 9,884,661 613.0
BGH064 582888 9884976 839 270 -50 220.8 222.6 0.63 1.80 582,746 9,884,976 668.9
271.0 276.0 2.93 4.95 582,769 9,885,057 586.1
BGH065 582913 9885057 819 270 -60
291.6 292.6 1.70 1.00 582,759 9,885,057 570.9
276.0 278.6 8.49 2.59 582,754 9,884,965 596.1
BGH066 582888 9884976 839 270 -60
300.0 301.0 1.78 1.00 582,742 9,884,965 576.6
295.8 300.5 3.21 4.72 582,789 9,885,065 548.1
BGH067 582913 9885057 819 270 -67 303.0 304.6 1.56 1.62 582,786 9,885,065 543.1
337.0 338.0 0.55 1.00 582,769 9,885,068 514.3
247.0 248.2 2.10 1.20 582,749 9,885,051 633.1
BGH068 582913 9885057 819 270 -50
251.8 255.1 1.75 3.30 582,745 9,885,051 628.8
BGH069 582888 9884976 839 270 -70 321.8 324.7 3.84 2.93 582,779 9,884,962 534.7
BGH070 582913 9885057 819 270 -73 331.0 336.4 3.00 5.35 582,802 9,885,040 505.2
BGH071 No significant intercepts
274.6 279.7 2.70 5.10 582,749 9,884,847 574.0
BGH072 582852 9884845 831 270 -67
290.4 294.8 3.61 4.40 582,742 9,884,847 560.0
BGH073 582731 9884691 838 280 -60 121.0 123.0 0.72 2.00 582,671 9,884,702 731.9
278.9 283.9 2.85 5.03 582,810 9,885,137 551.2
285.5 289.1 1.60 3.61 582,807 9,885,138 546.3
BGH074 582944 9885130 798 270 -67
294.5 297.3 7.14 2.79 582,802 9,885,139 539.1
299.7 303.3 0.53 3.69 582,799 9,885,139 534.5
115.4 116.7 6.76 1.25 582,690 9,884,690 729.4
119.5 120.8 15.22 1.30 582,688 9,884,690 725.7
BGH075 582731 9884691 838 270 -70
125.1 129.8 3.56 4.71 582,684 9,884,690 719.3
162.6 164.6 8.94 2.08 582,667 9,884,689 687.8
108.0 109.0 0.84 1.00 582,682 9,884,844 779.6
118.8 119.5 3.71 0.65 582,675 9,884,848 772.7
BGH076 582752 9884801 849 300 -40
128.2 131.0 2.82 2.85 582,668 9,884,852 765.8
136.7 137.0 0.97 0.30 582,663 9,884,855 761.0
316.8 321.2 2.57 4.36 582,830 9,885,130 501.7
323.0 328.4 2.56 5.36 582,827 9,885,130 495.8
BGH077 582944 9885130 798 270 -72 329.1 330.1 0.52 1.07 582,825 9,885,130 492.4
335.3 337.4 9.63 2.11 582,822 9,885,130 486.5
339.8 340.1 7.07 0.30 582,820 9,885,131 483.4
102.0 106.0 1.88 4.00 582,674 9,884,816 782.6
BGH078 582752 9884801 849 280 -40 108.0 109.0 0.62 1.00 582,671 9,884,817 779.7
115.0 117.2 0.80 2.15 582,665 9,884,818 774.8
290.2 294.4 1.00 4.25 582,765 9,884,842 552.6
296.3 302.3 9.46 6.00 582,763 9,884,841 546.1
304.8 305.7 18.75 0.89 582,761 9,884,841 540.5
312.0 313.0 1.08 1.00 582,758 9,884,841 533.8
BGH079 582852 9884845 831 270 -73
316.9 321.6 4.65 4.73 582,755 9,884,840 527.5
322.6 328.0 5.41 5.43 582,753 9,884,840 522.0
329.0 329.5 1.59 0.53 582,751 9,884,840 518.4
340.7 341.4 4.29 0.74 582,747 9,884,839 507.6
339.9 343.6 1.05 3.70 582,853 9,885,141 469.2
BGH080 582944 9885130 798 270 -75 345.0 346.6 4.11 1.55 582,851 9,885,141 465.5
360.7 361.0 11.95 0.30 582,846 9,885,143 451.5
269.0 274.6 1.99 5.56 582,838 9,885,306 578.6
BGH081a 583022 9885299 776 270 -50
275.6 275.9 0.64 0.30 582,835 9,885,307 576.0
263.8 266.3 3.43 2.47 582,836 9,885,222 556.0
BGH082a 583013 9885209 752 270 -50 268.4 269.2 3.32 0.80 582,833 9,885,223 553.5
277.0 277.3 15.65 0.30 582,827 9,885,224 547.9
BGH083 No significant intercepts
279.0 280.9 6.25 1.95 582,857 9,885,307 552.8
BGH084 583023 9885299 776 270 -57
283.1 286.3 1.28 3.25 582,854 9,885,307 549.2
BGH085 583023 9885299 776 270 -65 294.7 298.4 0.83 3.70 582,890 9,885,304 512.9
275.4 280.8 3.07 5.43 582,847 9,885,214 530.1
BGH086 583013 9885208 752 270 -57
286.1 286.5 18.90 0.46 582,841 9,885,215 524.4
BGH087 583023 9885299 777 270 -75 263.8 264.3 0.59 0.53 582,946 9,885,305 525.0
297.7 299.5 11.93 1.72 582,876 9,885,221 487.3
301.0 301.8 6.79 0.77 582,875 9,885,221 485.0
303.7 304.0 2.47 0.30 582,873 9,885,222 483.0
305.7 306.0 1.66 0.30 582,872 9,885,222 481.4
BGH088 583012 9885208 752 270 -67 307.2 307.6 6.66 0.35 582,871 9,885,223 480.2
308.3 308.9 12.15 0.67 582,871 9,885,223 479.2
309.5 309.8 1.98 0.31 582,870 9,885,223 478.3
310.4 310.7 17.65 0.33 582,869 9,885,223 477.6
313.0 313.9 2.82 0.85 582,868 9,885,224 475.3
324.5 324.9 5.77 0.38 582,861 9,885,226 466.3
325.4 325.8 10.40 0.40 582,861 9,885,226 465.6
198.0 199.0 4.58 1.00 582,822 9,885,357 628.9
202.7 203.5 12.25 0.80 582,819 9,885,357 625.5
BGH089 582951 9885352 779 270 -50
205.1 205.5 7.96 0.44 582,818 9,885,357 623.7
217.5 218.5 31.90 1.00 582,809 9,885,358 614.1
168.8 170.5 2.45 1.68 582,843 9,885,424 638.3
BGH090 582951 9885423 769 270 -50 170.9 171.5 12.55 0.60 582,842 9,885,424 637.1
173.0 173.3 5.05 0.33 582,841 9,885,424 635.6
BGH091 582951 9885352 779 270 -65 222.1 223.5 4.02 1.40 582,850 9,885,358 581.3
BGH092 583021 9885430 752 270 -55 193.5 193.9 17.15 0.38 582,913 9,885,431 591.9
224.3 224.8 4.06 0.50 582,932 9,885,341 549.9
BGH093 583013 9885345 759 270 -70 225.8 226.7 1.81 0.92 582,931 9,885,341 548.3
227.7 228.3 2.75 0.60 582,930 9,885,341 546.7
381.0 384.8 3.84 3.81 582,808 9,885,054 473.5
BGH094 582990 9885055 810 270 -65 389.7 390.3 5.95 0.51 582,805 9,885,054 467.4
408.5 411.0 5.82 2.55 582,795 9,885,054 450.4
391.6 399.6 4.56 8.03 582,773 9,884,762 482.7
400.0 401.0 1.85 1.00 582,770 9,884,761 478.6
BGH095 582960 9884759 831 270 -60
405.0 412.0 4.47 6.97 582,766 9,884,761 471.9
414.0 414.3 1.36 0.30 582,763 9,884,761 467.2
BGH096 No significant intercepts
242.0 245.5 1.10 3.50 582,879 9,885,344 555.7
BGH097 583013 9885345 759 270 -58
247.0 250.1 2.66 3.10 582,876 9,885,344 551.8
BGH099 No significant intercepts
226.8 231.3 2.09 4.51 582,965 9,885,347 535.2
BGH100 583013 9885345 759 270 -79
233.1 235.0 1.58 1.92 582,964 9,885,347 530.3
387.4 388.6 2.66 1.25 582,802 9,884,968 474.7
392.3 394.7 1.49 2.35 582,799 9,884,968 470.1
BGH101 582990 9884975 813 270 -65 396.0 398.2 0.53 2.24 582,797 9,884,968 467.1
402.7 410.2 3.68 7.46 582,792 9,884,967 459.3
423.6 425.5 13.48 1.84 582,781 9,884,967 444.5
BGH102 No significant intercepts
161.9 167.0 1.71 5.17 582,882 9,885,425 618.5
BGH103 582951 9885423 767 270 -64 167.8 172.1 1.11 4.29 582,880 9,885,425 613.4
173.4 177.0 1.71 3.65 582,877 9,885,425 608.7
459.4 463.0 10.19 3.65 582,829 9,885,047 378.1
464.8 465.1 8.35 0.30 582,827 9,885,047 374.8
BGH104 582985 9885054 811 270 -72 471.4 475.5 1.72 4.15 582,823 9,885,046 367.3
477.6 478.0 0.96 0.42 582,821 9,885,046 363.5
485.9 486.2 2.12 0.37 582,817 9,885,045 356.3
406.5 407.0 0.98 0.48 582,807 9,884,837 458.9
410.2 413.0 1.20 2.80 582,805 9,884,836 454.6
416.9 421.4 1.66 4.45 582,802 9,884,836 447.9
421.8 425.0 4.33 3.21 582,800 9,884,836 444.1
427.7 431.3 0.80 3.55 582,797 9,884,836 438.7
BGH105 582963 9884842 834 270 -70 434.6 437.4 1.11 2.77 582,794 9,884,835 433.0
442.3 442.6 1.98 0.30 582,791 9,884,835 427.3
446.0 446.3 1.24 0.30 582,789 9,884,834 424.1
453.7 454.0 0.62 0.30 582,785 9,884,834 417.4
457.8 459.9 5.03 2.17 582,783 9,884,833 413.0
461.7 462.6 0.91 0.93 582,781 9,884,833 410.2
BGH106 No significant intercepts
BGH107 582991 9884982 814 270 -75 496.9 502.2 8.21 5.21 582,826 9,884,984 343.4
377.2 377.5 11.95 0.31 582,786 9,884,895 495.2
381.5 381.8 7.40 0.30 582,784 9,884,895 491.5
385.3 387.5 4.50 2.20 582,781 9,884,895 487.6
BGH108 582963 9884905 828 270 -62
391.0 395.0 2.09 3.96 582,777 9,884,894 482.1
401.0 402.0 1.44 1.00 582,773 9,884,894 475.1
405.3 409.4 2.40 4.05 582,769 9,884,893 470.3
BGH109 No significant intercepts
459.2 467.4 1.00 8.14 582,799 9,884,879 397.0
468.1 476.7 10.35 8.58 582,795 9,884,878 389.2
BGH110 582963 9884905 828 270 -73
485.5 486.2 10.30 0.70 582,788 9,884,876 377.8
489.8 490.9 2.01 1.12 582,786 9,884,875 374.0
334.4 341.3 4.24 6.89 582,768 9,884,745 553.1
342.4 350.0 4.92 7.65 582,762 9,884,745 547.0
352.5 357.3 0.67 4.75 582,756 9,884,744 540.6
BGH111 582959 9884759 831 270 -55
358.3 361.3 0.63 3.03 582,753 9,884,744 537.0
362.7 367.2 0.58 4.50 582,749 9,884,744 533.3
368.0 370.2 3.15 2.16 582,746 9,884,743 530.4
130.3 130.6 2.32 0.30 582,797 9,885,360 681.8
BGH112 582870 9885354 790 270 -55
135.3 135.7 5.69 0.44 582,794 9,885,360 677.7
213.0 216.6 0.94 3.60 582,810 9,885,204 590.1
BGH113 582910 9885205 780 270 -62
229.0 230.0 4.49 1.00 582,803 9,885,204 577.3
138.5 138.9 4.40 0.36 582,807 9,885,358 666.2
143.3 143.6 6.84 0.30 582,805 9,885,358 662.1
BGH114 582870 9885354 790 270 -63
147.0 147.6 3.83 0.65 582,803 9,885,358 658.8
151.5 151.8 0.82 0.30 582,801 9,885,358 655.0
BGH115 No significant intercepts
285.4 292.0 3.51 6.63 582,727 9,884,661 577.7
BGH116 582886 9884671 818 270 -58
292.5 294.0 1.04 1.54 582,724 9,884,660 574.2
BGH117 No significant intercepts
95.0 95.9 2.05 0.90 582,795 9,885,430 686.6
BGH118 582842 9885430 769 270 -60
100.6 100.9 0.95 0.30 582,792 9,885,430 682.1
BGH119 582842 9885430 769 270 -75 103.0 105.0 2.33 2.00 582,814 9,885,431 669.5
323.0 327.4 0.98 4.41 582,746 9,884,662 528.2
BGH120 582886 9884671 818 270 -70
330.3 334.4 1.92 4.14 582,741 9,884,662 522.6
BGH121 No significant intercepts
153.4 157.5 1.50 4.09 582,786 9,885,123 640.6
BGH122 582853 9885112 780 275 -65 158.1 161.9 1.26 3.81 582,784 9,885,123 636.5
162.8 165.0 1.66 2.25 582,783 9,885,123 633.1
432.0 437.1 1.96 5.05 582,789 9,884,746 432.8
BGH123 582960 9884759 831 270 -70
438.5 438.8 1.20 0.30 582,787 9,884,746 429.3
BGH124 No significant intercepts
MND001 No significant intercepts
MND002 No significant intercepts
MND003 No significant intercepts
MND004 583392 9886283 682 270 -52 524.8 525.1 0.67 0.30 582,994 9,886,250 347.0
MND005 No significant intercepts
MND006 No significant intercepts
MND007 583100 9886210 726 270 -75 402.0 402.5 0.58 0.45 582,987 9,886,211 340.5
MND009 582881 9886200 752 270 -65 96.4 96.8 2.28 0.40 582,842 9,886,200 667.3
MND010 No significant intercepts
419.3 428.0 21.85 8.74 583,021 9,886,194 312.7
MND011 583103 9886211 726 270 -83
430.6 438.9 17.52 8.30 583,018 9,886,193 302.0
MND012 582950 9886140 765 270 -60 64.7 65.4 12.20 0.65 582,916 9,886,142 699.8
142.7 143.0 10.05 0.28 582,852 9,886,146 651.2
MND013 582945 9886142 759 270 -50
177.0 178.0 1.02 1.00 582,829 9,886,146 625.5
MND014 No significant intercepts
MND015a 582950 9886140 755 270 -70 172.3 172.7 6.34 0.36 582,887 9,886,144 594.8
MND016 583063 9886162 741 270 -50 249.4 253.0 0.62 3.58 582,895 9,886,161 554.1
MND017 583195 9886171 744 270 -50 385.0 386.0 1.02 1.00 582,947 9,886,165 450.1
MND018 583063 9886162 740 270 -60 284.7 285.0 11.70 0.30 582,912 9,886,160 498.4
432.2 444.0 25.94 11.76 582,992 9,886,162 357.3
MND019 583196 9886171 744 270 -64
445.0 445.6 15.30 0.55 582,988 9,886,162 351.2
484.9 492.3 7.08 7.36 583,024 9,886,160 288.3
MND020 583196 9886171 744 270 -72
495.0 499.3 7.50 4.25 583,020 9,886,159 280.6
MND021 583195 9886171 744 270 -57 425.3 425.6 10.50 0.30 582,962 9,886,178 388.9
547.0 558.3 7.62 11.30 583,060 9,886,205 220.5
MND022a 583244 9886211 741 270 -73 559.0 565.9 16.37 6.85 583,056 9,886,205 211.4
567.7 569.5 1.31 1.83 583,054 9,886,205 205.7
511.6 524.7 21.27 13.10 583,038 9,886,208 249.3
MND023 583204 9886236 738 270 -75
527.0 528.4 2.35 1.42 583,033 9,886,207 240.8
1. Apparent widths, not true thickness
Appendix 3: Checklist of Assessment and Reporting Criteria
Drilling techniques All drillholes were diamond drill cored and drilled from surface (most
intersections drilled using NQ size), holes drilled orientated in an east-west
direction were angled between -60° and -70°. Holes collared in the west
were drilled out in fan patterns into the side of a hill and angled between 0°
and minus 35°.
Logging All of the drillholes were geologically logged by qualified geologists. The
logging is of an appropriate standard for grade estimation.
Drill sample recovery Core recovery in the mineralised zones was observed to be very good and
is on average 97%.
Sampling methods Half core samples were collected continuously through the mineralised
zones after being cut longitudinally in half using a diamond saw. Drillhole
samples were taken at nominal 1 m intervals, which were adjusted to
smaller intervals in order to target the cassiterite vein zones. Lithological
contacts were honoured during the sampling. MSA’s observations indicated
that the routine sampling was performed to a reasonable standard and is
suitable for evaluation purposes.
Quality of assay data and At the on-site ABM laboratory (managed by Anchem), samples were first
laboratory tests checked off against the submission list supplied and then weighed and oven
dried for 2 hours at 105 degrees Celsius. The dried samples were crushed
by jaw crusher to 75% passing 2mm, from which a 250g riffle split was
taken. This 250g split was pulverised in ring mills to 90% passing 75?m
from which a sample for analysis was taken. Samples were homogenised
using a corner-to-corner methodology and two samples were taken from
each pulp, one of 10g for on-site laboratory assaying and another 150g
sample for export and independent accredited 3rd party laboratory
assaying.
Received samples at ALS Johannesburg are checked off against the list of
samples supplied and logged in the system. Quality Control is performed by
way of sieve tests every 50 samples and should a sample fail, the preceding
50 samples are ground in a ring mill pulveriser using a carbon steel ring set
to 85 % passing 75?m. Samples are analysed for tin using method code
ME-XRF05 conducted on a pressed pellet with 10% precision and an upper
limit of 5,000ppm. The over-limit tin samples are analysed as fused disks
according to method ME-XRF15c, which makes use of pre-oxidation and
decomposition by fusion with 12:22 lithium borate flux containing 20%
Sodium Nitrate as an oxidizing agent, with an upper detection limit of 79%
Sn.
Prior to the 2021 drilling the assays were also conducted at ALS Global in
Johannesburg where samples were analysed for tin using fused disc ME-
XRF05 with 10% precision and an upper limit of 10 000 ppm. This was
reduced to 5,000 ppm from 2014 onwards. Over limit samples were sent to
Vancouver for ME-XRF10 which uses a Lithium Borate 50:50 flux with an
upper detection limit of 60% and precision of 5%.
ME-ICP61, HF, HNO3, HCL04 and HCL leach with ICP-AES finish was
used for 33 elements including base metals. ME-OG62, a four-acid
digestion, was used on high grade samples for Pb, Zn, Cu & Ag.
External quality assurance of the laboratory assays for the Alphamin
samples was monitored. Blank samples (299), certified reference materials
(434) and duplicate samples (357) were inserted with the field samples
accounting for approximately 11% of the total sample set.
The QAQC measures used by Alphamin revealed the following:
• Blank samples indicated that no significant contamination occurred
overall. Low levels of contamination (mostly <200 ppm Sn) mostly
occurred, however 12 values between 229 ppm and 1,285 ppm
were returned. Given the high grades at Bisie, the levels of
contamination are not significant.
• Five different CRMs were used with expected values between
0.18% and 31.42% Sn. The lower grade CRMs were prepared by
Ore Research and Exploration (OREAS) and the two high grade
CRMs (4.19% and 31.42% Sn) by the Bureau of Analysed
Samples Ltd (BCS). In general, ALS returned values within the
tolerance limits (three standard deviations) for the OREAS CRMs,
although slightly lower than the expected values. Assays of the
highest grade BCS CRM were mostly outside of the three standard
deviation limits but within ±4%of the expected value. The update
assays of the high grade BCS-355 CRM were within ±2% of the
expected value with an overall low bias relative to the CRM
expected value. For the 5.07% Sn BCS CRM, assays were
consistently lower than the expected value by as much as 7%. This
trend continued for the update assays with an average under-
assay of 5% relative to the CRM expected value. Overall, the
CRMs results indicate a slight negative bias for the ALS assays.
• Coarse duplicates show mostly excellent correlation, indicating
minimal error in the process and a high degree of repeatability.
Verification of sampling and The mineralisation in thirteen of the drillholes completed in 2021 at Mpama
assaying South were visually verified during a site-visits by the QP in August 2021
and several of the initial drillholes were examined during earlier site visits to
Bisie. The QP observed the mineralisation in the cores and compared it with
the assay results. It was found that the assays generally agreed with the
observations made on the core. Core photos from the drilling programme
have regularly been provided to the QP for inspection.
105 pulp duplicates were sent to SGS (Johannesburg) in November 2021
for confirmation assaying.
• The pulp duplicates showed acceptable correlation with the ALS
assays at both high- and low-grade ranges with an overall bias of
near zero.
o Average bias for grade ranges > 1% is less than 1%.
o Tendency for ALS to be higher (~5%) for the grade ranges
less than 1%.
• Inter-lab precision (after removal of <0.10%) is 85% within 10%
error and 95% within 20% error
Location of data points The drillhole collar positions were surveyed using a differential GPS.
Downhole surveys were completed using a multishot down-hole survey
instrument (Reflex EZ-Track), or north seeking gyro (Reflex EZ-Gyro /
Reflex Gyro Sprint-IQ).
Tonnage factors (in situ bulk Relative density measurements were made on the majority of recent
densities) drillhole samples using the Archimedes Principle of weight n air versus
weight in water. A regression formula of tin grade against relative density
was developed and applied to the samples that did not have direct
measurements. The assigned specific gravity was interpolated into the
block model using ordinary kriging.
Data density and distribution A total of 124 holes were drilled in Mpama South. An additional 6 holes
previously drilled in the Wedge area of Mpama North have been included in
the Mineral Resource. Holes were drilled steeply from east to west, along
section lines spaced approximately 60 m to 80 m apart. Several sets of
holes were drilled in a fan pattern into the side of a steep hill, with
orientations spanning from the northeast to the southeast (from azimuth
045° to 125°). These drillholes fans intersect the mineralisation 25 m to 40
m apart in most of the Mineral Resource area.
Database integrity Data was provided as Excel files. MSA completed spot checks on the
database and is confident that the Alphamin database is an accurate
representation of the original data collected.
Dimensions The mineralisation consists of seven zones, with a total extent of 950 m
along strike. MZ1 has a strike length of 950 m and 500 m down-dip and
MZ2 has a strike length of 650 m and 500 m down-dip. Together, these two
zones account for 88% of the Mineral Resource. The zones occurring in the
footwall and hangingwall of the MZ1 and MZ2 tend to be narrower and
irregular in shape with strike lengths from 100 m to 300 m. MZ6, which is
located to the south has a strike length of 270 m and a dip length of 110 m.
Geological interpretation The mineralised intersections are clearly discernible in drill core. The
Mineral Resource is interpreted to occur as irregular veins and
disseminations of cassiterite that when combined form tabular mineralised
zones, dipping 65-70° to the east. The mineralised zones are hosted in
chlorite schist that is the result of intense hydrothermal alteration associated
with a fracture system.
MZ1 is the largest zone by volume of the Mineral Resource, with an extent
of 950 m and an average thickness of 4.1 m. MZ2 is the second largest
zone, with a strike length of 650 m and an average thickness of 3.4 m.
However, the thicknesses of these two zones vary from as little as 1 m, up
to 13 m thick.
Three smaller zones (MZ3 to MZ5) occur in the footwall of the main zones
of mineralisation which progressively become narrower, moving away from
the main zones. MZ3 thickness ranges from 1 m to 9 m with an average
thickness of 1.5 m. MZ4 has an average thickness of 1 m, attaining a
maximum thickness of 5 m. MZ5 has an average thickness of 1.2 m,
ranging from 1 m to 5 m. All zones become narrower along the edges,
where they pinch-out.
A narrow zone (MZ7) occurs in the hangingwall of the main mineralisation
with an average thickness of 0.5 m and a maximum thickness of 4 m.
MZ6, which occurs to the south, tends to be lower in grade and has an
average thickness of 4 m, ranging from 1 m up to 9 m. MZ6 is not part of the
Mineral Resource.
A three-dimensional wireframe model was created for the seven zones of
mineralisation based on a grade threshold of 0.40% Sn. MZ1 and MZ2
make up the main zone, which are the most consistent zones and occur
within a persistent chlorite schist. Narrower less continuous zones occur
above and below the main zone within chlorite-mica schists.
Domains The mineralisation was modelled as seven tabular zones containing
irregular vein style mineralisation. A hard boundary was used to select data
for estimation in order to honour the sharp nature of vein boundaries.
Compositing Sample lengths were composited to 1 m by length and density weighting.
Statistics and variography Statistics for the seven estimation domains show distributions that are
positively skewed with coefficients of variation (CV) ranging from 1.3 to
1.96, the only exception being domain MZ7 which shows lower variability
due to very few composites resulting in a CV of 0.79.
The two main zones (MZ1 and MZ2) have similar average tin grades
(2.22% and 2.11% respectively). The smaller, footwall zones (MZ3 to MZ5)
are higher in tin grade with averages ranging from 3% to 4.41% while MZ6
and MZ7 are lower in tin grade, with an average of 0.63% and 1.07%
respectively.
Normal Scores semivariograms were calculated in the plane of the
mineralisation, down-hole and across strike. Variograms were modelled for
tin, with a range of 40 m within the plane of mineralisation and with a range
of 3 m across the structures.
Top or bottom cuts for grades Top caps were applied to outlier values, identified as breaks in the
cumulative, probability plots.
Data clustering Data clustering occurs where the fan drilling, collared on the western side of
the deposit, intersect the surface drilling collared in the east, resulting in a
data spacing of 25 m to 40 m towards the centre of the deposit. Outside of
this area, the grid spacing becomes more regular, 60m to 80 m along strike
and 50 m down-dip.
Block size A rotated block model with a parent cell of 10 mX by 10 mY by 2 mZ was
used. Sub-celling was used to divide the parent cells to a minimum sub-cell
of 1 mX by 1mY by 0.2 mZ to closely fit the narrow portions of the vein
structures
Grade estimation Tin, copper, lead, zinc, silver, arsenic and density were estimated using
ordinary kriging. A minimum number of 5 and a maximum of 10 one metre
composites were required for the tin and density estimates. A minimum of 5
and maximum of 8 composites were used for the other elements.
Estimation was carried out in three passes, with the first pass using search
volumes coinciding with the variogram ranges. A second pass estimate
expanded the search volumes by a factor of 1.5 to estimate blocks where
insufficient samples were present for an estimate in the first pass. Where
blocks remained un-estimated from the first two passes, a third pass, using
an expansion factor of 10 was used to ensure all blocks in the model
received a grade and density estimate.
Dynamic Anisotropy was used to orientate the search volumes to the strike
and dip of the individual mineralised zones.
Resource classification Indicated Mineral Resources were declared where the drillhole spacing is
approximately 40 m and where the geological model has low variability. The
remainder of the interpreted model was classified as Inferred Mineral
Resources, corresponding to areas informed by drilling spaced 50 m to 80
m apart with a maximum extrapolation of 20 m from the nearest drillhole.
Mining cuts and cut-off grade A minimum of 1 m was applied to the mineralisation model. The thickness,
assumptions. grade and steep dip implies that the Mineral Resource can be extracted
using established underground mining methods similar to those applied at
Mpama North.
A 1% cut-off grade was applied based on the Mpama North costs and
prevailing tin price.
Isolated blocks above cut-off grade in dominantly low-grade areas of the
model were not included in the Mineral Resource
Metallurgical factors or The tin mineralisation occurs as cassiterite, an oxide of tin (SnO2). At
assumptions Mpama North gravity separation is used to produce a tin concentrate. The
Cu, Zn and Pb mineralisation occurs as sulphides, which are removed by
flotation to create the cassiterite product. It is assumed that similar
processes will be used to process the Mpama South mineralisation.
Legal aspects and tenure Alphamin through its wholly owned DRC subsidiary, Alphamin Mining Bisie
SA, has a Mining License PE 13155 which includes the Bisie Tin Mine.
Alphamin has an 84.14 percent interest in ABM. The Government of the
Democratic Republic of Congo (GDRC) has a non-dilutive, 5% share in
ABM.
Audits, reviews and site The following review work was completed by MSA:
inspection • Inspection of approximately 20% of mineralised core intersections
used in the Maiden Mineral Resource estimate.
• Database checks.
• Inspection of Mpama South drill sites in August 2021.
• On-site review of the exploration processes.
• Laboratory inspections.
Date: 03-06-2022 01:00:00
Produced by the JSE SENS Department. The SENS service is an information dissemination service administered by the JSE Limited ('JSE').
The JSE does not, whether expressly, tacitly or implicitly, represent, warrant or in any way guarantee the truth, accuracy or completeness of
the information published on SENS. The JSE, their officers, employees and agents accept no liability for (or in respect of) any direct,
indirect, incidental or consequential loss or damage of any kind or nature, howsoever arising, from the use of SENS or the use of, or reliance on,
information disseminated through SENS.